5 - The dtawing in which consists in passing each warp yarn in the eyelet of a heald of a shaft frame, in a given order, by means of a hook.
6 - The reedind which consists in passing each thread independently or grouped by 2, 3, 4 or more in a tooth of the reed.
7. The winding which consists in attaching the warp yarns to the front roller of the loom.
8 - The attachment which consists of attaching the shaft frames to the treadles.
9 - levelling the healds which consists of adjusting the height of the shaft frames and making various adjustments.
10 - Weft winding which consists of winding weft yarn on the weft cops that will go into the shuttle.
11 - Finally comes the beginning of the weaving.

These tasks are in chronological order:
1 - The supply of materials.
2 - Unwinding consists of transporting the material supplied from the support to which it is delivered to a number of bobbins.
3 - Calculation of the quantities of materials required.
4 - The warping which consists in putting the threads as parallel as possible  on the back beam. The set of these threads constitutes the warp. There are several warping techniques, some of which involve the use of a warping machine. Since your loom is equipped with a beam (rear chain roller) whose circumference is one meter or more, you will not need this machine since we will use the sectional warping that will be done directly on the warp beam .

The phases of weaving
The realization of a fabric on a craft craft decomposes immutably in a certain number of tasks to be carried out from the supply of materials to the complete realization of the fabric.